quarta-feira, 31 de dezembro de 2014

[ROM][5.0.2][titan]The Titan Prime v1.3 RC


Rom Banner

Hi guys...This is the Titan Prime ROM. I created this ROM because there aren't many ROMs for the Moto G 2014, and I wanted to change that. I have added numerous features and modifications. This ROM is just starting out so don't be afraid to request a feature. Also, note that I will not be abandoning this project, so in other words this ROM has long term support. 

DISCLAIMER

Code:

/*


* Your warranty is now void. Knox 0x1.

*

* I am not responsible for bricked devices, dead SD cards,


* thermonuclear war, or you getting fired because the alarm app failed. Please


* do some research if you have any concerns about features included in this ROM

* before flashing it! YOU are choosing to make these modifications, and if

* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.


*/

Supported Devices:

This ROM is supported by the following devices:
  • XT1063
  • XT1064
  • XT1068
  • XT1069

Installation:
NOTE: It is recommended you do a clean install. The instructions below show how to preform a clean install and install this ROM.
1. Download the appropriate ROM version you wish to install
2. Download the appropriate gapps 
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
8. Flash the gapps.
9. WIPE DALVIK/CACHE 
10. Reboot Device.

ROM Version Info

ROM Name: Titan Prime
ROM Version: 1.3
ROM Status: RC

WORKING
  • Service
  • Text
  • Data
  • Call
  • Audio
  • WiFi
  • Google Now
  • Bluetooth
  • GPS
  • MMS
  • Video playback
  • Audio playback
  • Internal/External SDcard mounting
  • Camera
  • Video recording

NOT WORKING
  • You tell me!

ROM Features
  • Based of stock Android 5.0 wih Android 5.0.2 merged
  • Faster OS
  • Added Int.d
  • Added libraries
  • Debloated
  • Google Now Launcher
  • Custom boot animation (made by me)
  • Much, much, more

Upcoming Features:
  • Built-in root
  • OG battery mod
  • Clear all button in recent apps
  • Quick unlock on lock screen when secured with pin
  • You tell me...this ROM is just starting and has endless possibilities 

Download

Note: All downloads links in the OP post are via MEGA. I do allow other users to post mirrors in the comments below
Latest ROM Release:


Changelog
XT1063/64

Quote:
Version 1.0 [DEC 14]:
- Initial Release 
Version 1.0 RELEASE 2 [DEC 15]:
***YOU MUST MANUALLY UPDATE TO THIS VERSION BY DOWNLOADING THE .ZIP AND FLASHING IT...YOU CAN NOT USE THE v1.0 OTA Updater App!***
- Fixes OTA Updater bug
Version 1.1 [DEC 15]:
- Removed Help app
- Bug fixes
- updated Google API libraries in /system/lib directory
Version 1.2 Previews:


For XT1063/64
Preview 1 
-Initial Preview
-Successfully merged Android 5.0.1
-Debloated
-Deodexed
-Bug fixes

Preview 2 
-New bootanimation
-New Lollipop Dialer
-AOSP mms replaced by new Google Messenger
- Fixed brightness issue
- Fixed memory issue
- Fix WiFi issue
- Merged Android 5.0.2

Preview 3 
- fixed rotation bug
- fixed recovery bug
- stability improvements


Preview 4 
- Boot.img fixes
- Boot animation fix
- Updater-Script tweaks
- Stability improvements
- added libraries in /system/lib making this a stand-alone ROM...No prerequisites (YA! )

XT1068/69

Preview 1 
-Initial Preview
-Successfully merged Android 5.0.1
-Deodexed
-Bug fixes

Preview 2 
- WiFi bug fixed
- Camera bug fixed
- Bluetooth bug fixed
- New boot animation
- New lollipop dialer app
- Replaced AOSP SMS app with new Google Messanger
- Android 5.0.2 merged
- Debloated
- Fixed memory issue
- Fixed brightness issue
- Fixed recovery bug
- Fixed rotation bug

Version 1.2 [DEC 22]:
- OS upgrade to Android 5.0.2
- XT1068 support
- Added Google Now Launcher
- Debloated
- New Google Messenger app and Dialer from lollipop
- New boot animation
- Fixed memory issue (somewhat)
Version 1.3 RC 1[DEC 27]:
- Added CM apps
- Added CM 12 launcher
- Removed Motorola ID
- Minor Bug fixes
- Stability improvements (much faster)

XT1068/69

Quote:
Version 1.2 [DEC 24]:
- OS Upgrade to 5.0.2
-Added Google Now Launcher
- Debloated
- New Messaging app
- New dialer
- New boot animation
- Stability improvements
- Memory issue fixed
- Miscellaneous updates
Version 1.3 RC 1[DEC 28]:
- Added CM apps
- Added CM 12 launcher
- Fixed Messaging app to support dual sim
- Removed Motorola ID
- Minor Bug fixes
- Stability improvements (much faster)


Credits:

ROM Maintainer: @Shawn5162
ROM Banner Creator: @HJain13
Firmware: Motorola Mobility
Deodexing Tool: @joeldroid
Help extracting boot.img: @droidjbc

Donations:

TO DONATE CLICK THE "DONATE TO ME" BUTTON ON THE LEFT SIDE OF THIS POST UNDER MY XDA USERNAME
ALL DONATIONS ARE GREATLY APPRECIATED 


THERE IS A NEW THREAD FOR THE XT1063 AND XT1064 AT HERE!


XDA:DevDB Information
[ROM][5.0.2][titan]The Titan Prime ROM[DEC 14](Version 1.3 RC), ROM for the Moto G 2014

Contributors
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: Motorola Stock 5.0.1 Firmware

Version Information
Status: RC
Current Beta Version: 1.3
Beta Release Date: 2014-12-29

Created 2014-12-15
Last Updated 2014-12-14

Fonte: XDA Developers

domingo, 14 de dezembro de 2014

[ROM][STOCK][5.0.2] Moto G XT1068/69 Lollipop Retail BR


INDICE (Utilize Ctrl+F para procurar o que quer):
  1. Instando o TWRP Recovery
  2. Fazendo ROOT
  3. Reinstalando a Recovery Stock
  4. Removendo aviso de bootloader desbloqueado
INFORMAÇÕES
Rom Stock: Lollipop
Versão do Android: 5.0.2 [RETAIL BRASIL]
Número da Versão: LXB22.46-28
Para: Moto G 2014
imageNem eu e nenhum usuário do AndroidPit se responsabiliza por quaisquer danos que possam ocorrer em seu telefone. Faça por sua conta e risco.
DOWNLOAD:
Versão: LXB22.46-28
Moto G 2014 XT1068 - Reupado - 03/09/2015
Moto G 2014 XT1069 - Reupado - 03/09/2015
Versão: LXB22.99-16 (Use está versão caso seu aparelho já tenha vindo com lollipop, se não a câmera frontal deixará de funcionar)
OBSERVAÇÕES:
  1. A bateria deve estar com pelo menos 70% de carga.
  2. No arquivo .zip já está incluso o adb e mfastboot.
  3. Se der erro ao instalar DESBLOQUEIE O BOOTLOADER
b
VAMOS COMEÇAR:
No PC 
1. Extraia o arquivo baixado com o WinRar, baixe o Minimal ADB e Fastboot e em seguida extraia e coloque os arquivos dentro da pasta em que você colocou os arquivos da ROM (Sim, todos os arquivos juntos em uma pasta só)

No Celular 
2. Ligue seu Moto G 2014 no modo bootloader (Power + VOL-) 
e conecte o celular no PC.

No PC 
3. Entre na pasta que foi extraída, você verá todos os arquivos da ROM e do Minimal ADB e Fastboot, pressione shift + botão direito do mouse e selecione Abrir janela de comando aqui 
4. Na janela que foi aberta digite os seguintes comandos (Para não ter nenhum erro, escreva linha por linha e aperte enter):

mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
......
J. Pietro
Há muito importante: Quando o dispositivo iniciar é recomendado que deixe ele no canto (onde foi conectado ao PC) e o esqueça lá por pelo menos uns 10 minutos, pois é o tempo que ele vai carregar o sistema por completo, e iniciar/encerrar os apps do sistema. Outra dica é trocar o Launcher padrão pelo Nova Launcher, pois o Google Now Launcher da uns lags nas transições.
Screenshots (Xt1069)
image 
image 
image 
image

Se o tutorial foi útil por favor comente :D

segunda-feira, 8 de dezembro de 2014

[Tutorial] Lollipop para Moto G XT1033

Requisitos: 

Moto G (XT1033) – Dual Sim, rodando o Android 4.4.4. 

Não custa reforçar: esse arquivo de atualização NÃO funciona nos demais modelos (XT1032, XT1031, XT1034, nem a variante 4G). 

O aparelho NÃO deve possuir permissões de acesso ROOT. 

Seu aparelho deve ser retail (em configurações / sobre o telefone, a versão do sistema deve constar como 210.12.40.falcon_umtsds.Brasil.en.BR). 

Bateria com pelo menos 60% de carga. 

Baixe o arquivo OTA em algum desses servidores: Mega, MediaFire ou DevHost. [você consegue outros links aqui, caso algum desses esteja fora do ar] 

Coloque o arquivo na raiz da memória do seu aparelho (direto na memória, fora de quaisquer pastas).
 NÃO descompacte o arquivo. Você deve colocá-lo em seu formato original, .zip. 

Desligue o aparelho. Vamos agora entrar no modo recovery. 

Ligue o aparelho segurando os botões power + diminui volume por alguns segundos. Solte-os simultaneamente. 

A tela do modo fastboot será exibida. 

A navegação nesse modo é um pouco diferente. O botão vol down (diminui volume) navega entre as opções e o botão vol up (aumenta volume) entra na opção selecionada. 

Utilizando esse método de navegação, entre na opção recovery. 

Se seu aparelho exibiu a imagem do Bugdroid (sim, o robozinho verde tem nome) com a barriguinha aberta, deu tudo certo. Seu aparelho já está no modo recovery. 

Caso não apareça a mensagem “nenhum comando”, segue a tecla vol up por alguns segundos. Depois, pressione uma vez o botão power. O menu de opções será exibido. 

A navegação aqui também funciona de outra forma. As teclas de volume navegam entre as opções e o botão power entra na opção selecionada. 

Selecione a opção appy update from sd card… 

Selecione o arquivo Blur_Version.210.12.40.falcon_umtsds.Brasil.en.BR.zip e confirme com o botão power. 

Entre no modo recovery novamente. 

Selecione a opção wipe data / factory reset. Nota: esse procedimento vai deletar TODOS os dados no telefone. 

Selecione a opção reboot system now. Pronto! 

Como atualizar?

Meu aparelho não inicia, e agora?







Pronto! Seu aparelho já está sendo atualizado. O processo leva alguns minutos, portanto seja paciente. Logo após a conclusão da atualização, o aparelho deve reiniciar automaticamente e otimizar os aplicativos já instalados. Essa última parte do processo também demora, e pode dar a impressão que o aparelho está travado. Mais uma vez, tenha paciência e aguarde alguns minutos.

Se seu aparelho não inicia mais, é provável que você consiga resolver o problema segundo os seguintes passos:

Se mesmo assim, seu aparelho não liga, siga este tutorial para reinstalar o sistema (4.4.4) do zero. A única diferença é que você deve baixar e utilizar a ROM brasileira no lugar da ROM indicada no tutorial, que é asiática. Os demais procedimentos são os mesmos.
Confira algumas imagens do Lollipop no Moto G XT1033:

Conseguiu atualizar seu aparelho? O que achou da nova versão do sistema? Tem alguma dúvida? Deixe seu comentário aqui embaixo!